COMPETENCE 4 -Operate Main and Auxiliary Machinery and – Associated Control Systems
Results
Congratulations! Share the result.
Try again. There is always a chance. Review the results.
#1. . The quantity of heat is affected by the amount of _______that is present in the substance heated.
Incorrect!
#2. The proper treatment for shock is:
Incorrect!
#3. It is the transfer of heat energy through air, space, or vacuum.
Incorrect!
#4. The process of changing a solid to a liquid is called the latent heat of
Incorrect!
#5. The speed of the ship's propeller through the water is 12.5 knots, however due to slip, the sip covers a distance of only 287 nautical miles in 24 hours. Calculate what percentage of the propeller speed does the slip represent?
Incorrect!
#6. Heat exchanger used to heat the boiler feed water by means of waste gas as it passes thru series of tubes to the stack.
Incorrect!
#7. It is study of the relationships between heat energy, work and the properties of matter, also of the conversions of heat energy and work by means of heat engines.
Incorrect!
#8. It is the transfer of heat energy from one molecule to molecule
Incorrect!
#9. The kind of heat involves a transformation of matter from one physical state to another without changing its temperature.
Incorrect!
#10. At pressure of 1.013 bar, or atmospheric pressure at sea level, water boils at ________.
Incorrect!
#11. . It is defined as a product of the force and the distance travelled by the force measured along the line of action of the force .
Incorrect!
#12. Boiler horsepower is equivalent to
Incorrect!
#13. The main engine RPM must be lowered so that it will conform with the RPM design of the propeller. This can be done by the installation of a ________.
Incorrect!
#14. It is scavenge system in a four stroke diesel engine where the intake and exhaust systems are controlled by intake and exhaust valve attached at the cylinder head______.
Incorrect!
#15. Find the area of a single cylinder engine whose piston diameter is 8.89 centimeters __________.
Incorrect!
#16. The volume swept by the piston from top dead center to bottom dead center is called _________.
Incorrect!
#17. A turbine is mechanical device, which produces work by converting _________.
Incorrect!
#18. Superheated steam is used in main turbine propulsion plants because superheated steam has _______.
Incorrect!
#19. It is a series of events repeated in the same regular events ________.
Incorrect!
#20. The gas law represented by formula PV/T= constant is _______.
Incorrect!
#21. Torque is a force which tend to produce
Incorrect!
#22. An engine which run with petrol (or paraffin) as the fuel are sometimes called as .
Incorrect!
#23. According to the fuel used this type of engine uses high grade of fuel which is highly flammable _________.
Incorrect!
#24. Absolute pressure is accurately indicated by
Incorrect!
#25. Heat extracted in the process of changing a liquid to a solid is called the latent heat of
Incorrect!
#26. It is part of the engine that lowers the revolution of the main engine in relation to the driven shaft speed _________.
Incorrect!
#27. This is the distance travelled by the piston from top to bottom or bottom to top .
Incorrect!
#28. It is the hotness or coldness of the body.
Incorrect!
#29. _________ is the ratio of the volume of fuel charge at the beginning of the compression to the volume at the end of compression .
Incorrect!
#30. What is the principle which states that buoyant force acting on a body partially or completely immersed in a fluid is equal to the weight of fluid displaced?
Incorrect!
There are 30 questions for the actual examination for Competence 4 for OIC-EW with a passing rate of 70%. This means that you are only allowed to make 9 mistakes.
DISCLAIMER
The questionnaires contained in this “reviewer” are extracted from the post released by MARINA on their official website and other review materials. Please note that Seaman Kowts is not affiliated with, endorsed by, or connected to the official website of MARINA. The information provided on this website is for general informational and educational purposes only and should not be relied upon as official or authoritative. If you require official information or services, please visit the official website or any relevant review center. We do not assume any responsibility or liability for any consequences resulting from the use of information or services provided on this website.
