COMPETENCE 11 – Maintain Seaworthiness of the Ship
Results
Congratulations! Share the result.
Try again. There is always a chance. Review the results.
#1. It is dimension of a ship's frames, girder, plating etc.
Incorrect!
#2. In transversely framed ship, the transverse frames are supported by all of the following EXCEPT________.
Incorrect!
#3. Member that fit between the floors of a vessel and stiffen double bottom?
Incorrect!
#4. It is the structural member of the hull extending in force.
Incorrect!
#5. Kind of tank that is usually constructed onboard cargo vessels used as bulkhead enclosing the stern tube and rudder trunk in a watertight compartment is:
Incorrect!
#6. Lighter longitudinal stiffening frame on the vessels side plating are called _________.
Incorrect!
#7. Longitudinal meeting of edges planks, strakes and plates?
Incorrect!
#8. In the ship construction, the shell plating is arranged in strakes which are given letter designations if the strakes were letter A K, the K strake will be .
Incorrect!
#9. Molded depth is measured from the ________.
Incorrect!
#10. Keel scantling of any vessel are greatest amidships because __________.
Incorrect!
There are 10 questions for the actual examination for Competence 11 for OIC-EW with a passing rate of 70%. This means that you are only allowed to make 3 mistakes.
DISCLAIMER
The questionnaires contained in this “reviewer” are extracted from the post released by MARINA on their official website and other review materials. Please note that Seaman Kowts is not affiliated with, endorsed by, or connected to the official website of MARINA. The information provided on this website is for general informational and educational purposes only and should not be relied upon as official or authoritative. If you require official information or services, please visit the official website or any relevant review center. We do not assume any responsibility or liability for any consequences resulting from the use of information or services provided on this website.
