COMPETENCE 11 – Maintain Seaworthiness of the Ship
Results
Congratulations! Share the result.
Try again. There is always a chance. Review the results.
#1. Shell plating that has curvature in two directions and must be heated and hammered to shape over specially prepared forms is called ______.
Incorrect!
#2. Ship's partitions which divides the interior various compartments:
Incorrect!
#3. Partial deck above the main deck located at the stern:
Incorrect!
#4. Owing to the girth of a ship amidships than at the ends certain strakes are dropped as they approach the bow and stern to reduce the amount of plating at the ends. These strakes are called ________.
Incorrect!
#5. One functions of a bulwark is to ____________.
Incorrect!
#6. Shell plating is__________.
Incorrect!
#7. Part of the ship serves to subdivide the ship against flooding, spread of fire and resist racking stress and vessel is called:
Incorrect!
#8. Panting plate frames are located in the ________.
Incorrect!
#9. Plates that cover the top of hawsepipe and chain pipes:
Incorrect!
#10. Reinforcing frames attached to a bulkheads on a vessels are called ________.
Incorrect!
There are 10 questions for the actual examination for Competence 11 for OIC-EW with a passing rate of 70%. This means that you are only allowed to make 3 mistakes.
DISCLAIMER
The questionnaires contained in this “reviewer” are extracted from the post released by MARINA on their official website and other review materials. Please note that Seaman Kowts is not affiliated with, endorsed by, or connected to the official website of MARINA. The information provided on this website is for general informational and educational purposes only and should not be relied upon as official or authoritative. If you require official information or services, please visit the official website or any relevant review center. We do not assume any responsibility or liability for any consequences resulting from the use of information or services provided on this website.
