COMPETENCE 5 – Operate Fuel, Lubrication, Ballast and Pumping Systems and Other Associated Control Systems
Results
Congratulations! Share the result.
Try again. There is always a chance. Review the results.
#1. If your ship burns 8 tons of fuel per hour at 15 knots, how many tons per hour will it burn at 18 knots?
Incorrect!
#2. A centrifugal pump produces flow with a resulting discharge head by energy conversion. It is typical for the energy conversion to follow the order of:
Incorrect!
#3. If you attempt to tighten a leaking hydraulic fitting with pressure on the system, you will:
Incorrect!
#4. Cargo hose carried on tank vessels shall be able to withstand a pressure of at least:
Incorrect!
#5. Heating the fuel oil to an excessively high a temperature in a fuel oil heater will cause:
Incorrect!
#6. A hydraulic fluid flow control circuit, controlling linear actuator speed during extension, with the pump operating at system pressure, is known as a:
Incorrect!
#7. A centrifugal ballast pump has a capacity of 200 gpm. If suction is taken on a ballast tank containing 200 long tons of seawater, how much water will be remain in the tank after discharging for one hour?
Incorrect!
#8. An axial piston pump differs from a radial piston pump as the pistons of an axial piston pump are positioned:
Incorrect!
#9. A liquid is being transferred by a centrifugal pump. As the liquid passes through the volute, its velocity decreases and:
Incorrect!
#10. After coolers are used with air compressors to:
Incorrect!
There are 10 questions for the actual examination for Competence 5 for OIC-EW with a passing rate of 70%. This means that you are only allowed to make 3 mistakes.
DISCLAIMER
The questionnaires contained in this “reviewer” are extracted from the post released by MARINA on their official website and other review materials. Please note that Seaman Kowts is not affiliated with, endorsed by, or connected to the official website of MARINA. The information provided on this website is for general informational and educational purposes only and should not be relied upon as official or authoritative. If you require official information or services, please visit the official website or any relevant review center. We do not assume any responsibility or liability for any consequences resulting from the use of information or services provided on this website.
